Olivetti d-Color P20W Manual de usuario descargar pdf (Pagina 59)

Microsoft Windows> 59

If the above IP address is entered, the Port Name will

default to IP_192.168.1.31.

8. Select [Next]. [Additional Port Information Required] is

displayed.

9. Under [Device Type], select [Custom] then [Settings].

10. Ensure [Protocol] is set to [LPR].

11. Ensure [Queue Name] is "lp" and [SNMP Status Enabled]

is deselected.

12. Select [OK].

13. Follow the instructions on the screen to finish installing

the printer.

Port 9100

1. Select [Start], [Settings], [Control Panel]. and [Printers

and Other Hardware].

2. Select [Printers and Faxes].

3. Click [Add Printer] and then select [Next].

4. Select [Local printer attached to this computer], clear the

[Automatically detect and install my Plug and Play printer]

check box, and then select [Next].

5. Select [Create a New Port] and select [Type Standard

TCP/IP Port].

6. Select [Next].

The [Welcome to the Add Standard TCP/IP Printer Port

Wizard] will appear.

Select [Next] and provide the following information. Enter

[Printer name or IP address], for example: 192.168.1.31. If the

above IP address is entered, the Port Name will default to

IP_192.168.1.31.

7. Select [Next]. [Additional Port Information Required] is

displayed.

8. Under [Device Type], select [Custom] then [Settings].

9. Ensure [Protocol] is set to [Raw].

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 94 95

Sin comentarios

Olivetti d-Color P20W Manual de usuario Pagina 59